加入购物车成功!
- 产品名称:肯天含硅脱模剂 Lusin® Alro O 152 S
- 浏览:
- 添加时间:2015-11-02 15:35:33
- 推荐度:
Lusin® Alro OL 152
Silicone-free all-round release agent for processing thermoplastic materials
Benefits:
- Mould temperature up to 150 °C
- Extremely thin spray film
- secondary treatment of components is possible
Typical Performance Characteristics (open stock):
Density, DIN 51757, at 20°C g/ml,
approx.
0,80
Flashpoint / °C approx. 10
Solid content / % approx. 5.5
Product description:
LUSIN® ALRO OL 152 is an allround release agent for processing thermo-plastics. It is based on fatty oils and additives. LUSIN® ALRO OL 152 is suitable for temperatures up to 150°C.
Other characteristics include:
− extremely thin separating film
− excellent separating and sliding effect as well as high pressure absorption capacity
− long service life (several release cycles are possible)
− Secondary treatment is possible, e.g. painting,printing, glueing (compatibility test required)
Application:
Release agent for processing thermoplastic materials(e.g. PE, PS, PVD, PA, etc.) by injection moulding if a thin separating film is required.
Apply a thin film to the clean moulds, especially to edges and undercuts.
Note:
We recommend a compatibility test prior to secondary treatment. If the separating film is too thick(„over-lubrication“), flowmarks may appear after secondary treatment. Release agent residues can be easily removed with water containing some LUSIN®CLEAN W 81.
Shelf life:
12 months
Spray : 2 years
Storage / Handling:
For further information on storage, handling, hazards,etc. please refer to safety data sheet.
Packaging:
− Spray: 400 ml (12 aerosols per carton)
Arttiiclle No.. 001060
− Canisters: 1l, 10l, 20l, 200l
Arttiiclle No.. 203110