加入购物车成功!
- 产品名称:肯天无硅高温脱模剂 Lusin® Alro OL 401
- 浏览:
- 添加时间:2015-11-02 15:35:33
- 推荐度:
Lusin® Alro OL 401
Silicone-free release agent for processing of high temperature resistant plastics
Benefits:
- Suitable for MAKROLON and LEXAN
- up to 150 °C mould temperature
- injection moulded parts can be finished
- long cycle times – multiple demould
Product description:
LUSIN® ALRO OL 154 is a silicone free release agent for processing of thermoplastics and duromers. It is based on special fatty oils and additives.
LUSIN® ALRO OL 154 is suitable for use at mould temperatures up to 150 °C.
Special properties:
- excellent release and slip effect
- long cycle times – multiple demould
- finishing processes such as painting, printing and bonding are possible. Preliminary testing is recommended.
Application:
As a release agent for thermoplastics and duromers.
Apply a fine film to the clean mould taking particular care to cover properly edges and undercuts. The work area should be well ventilated.
Note:
Too generous application of the spray can lead to streaking of parts and difficulty in finishing.
Release agent residues can be removed easily with water and a dash of cleaner such as Lusin® Clean W 81.
Shelf life:
2 years
Storage / Handling:
For further information on storage, handling, hazards,etc. please refer to safety data sheet.
Packaging:
Spray can 400 ml / 12 cans per carton
Code N° : 001120
标签: 脱模剂 无硅,高温型